Print

KX3 Allband Allmode 160-6m Kit

KX3 Allband Allmode 160-6m Kit

KX3 Allband Allmode 160-6m Kit

Display per page
Sort by
1 - 30 of 35 results
Product no.: KHAT
22.00 *

Shipment from Stock: 1

Product no.: KX3-K

KX3 Transceiver     CE

 

 

 

  • 160-6 meters, SSB/CW/DATA/AM/FM modes
  • 10 W PEP (100 W with KXPA100 amp)
  • Only 1.5 pounds (0.7 kg)
  • Current drain as low as 150 mA
  • Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
  • Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
  • Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
  • Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard outputs

 

  • ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket, also you have to order the ATU or the roofing filter seperately if you want!
  • The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 
    If you install the Roofing Filter KXFL3 yourself, you need a stable -33dBm signal in the middle of any band between 160m and 60m to align for optimal sideband supression.

 

1,250.00 €
1,225.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KX3_EINBAU_Service

installation of later ordered options in KX3 by QRPproject

50.00 *

Shipment from Stock: 999,999

Product no.: KXAT3

8-inductor/8-capacitor L-network provides very wide matching range and fast tuning.

Multiple per-band memories provide nearly instant re-tune. Operates even in receive, improving selectivity ahead of receiver.

Includes filter elements to optimize AM broadcast band receive (0.5-1.6 MHz).

250.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXFL3

Adds high-performance, hand-trimmed roofing filters ahead of the receiver's DSP subsystem, resulting in improved close-spaced dynamic range in CW, data, and SSB modes. 500 Hz/1500 Hz matched analog filters (1000/3000 Hz equivalent IF passband in I and Q channels).

200.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: AbgleichKX3
90.00 *

Shipment from Stock: 999,993

Product no.: KXBC3

Safely and automatically charges 8 NiMH cells in the KX3's internal 8-AA battery pack from an external 12-15 V supply.

Charge time varies depending on cell capacity and depth of discharge; 8 hours typical. Includes real-time clock, providing time display and alarm.

100.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXPD3
165.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXPD2

The KXPD2 is a very compact mechanical keyer paddle that attaches directly to the front of KX2 (or KX3). This eliminates the need for a heavy keyer base. It includes a slot in which to store the contact-adjustment wrench.

150.00 *

Shipment from Stock: 1

Product no.: MH3
88.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KX3-PCKT

The KX3-PCKT cable set interfaces between the Elecraft KX3 and personal computers, and provides convenient connection to an external foot switch and RF power amplifier.

 

32.00 *

Shipment:
innerhalb 3 Tagen lieferbar

Product no.: klinkeadapter
3.50 *

Shipment from Stock: 9

Product no.: VSLKX3KabelVV

SignaLink cable to connect an Elecraft KX3

20.00 *

Shipment from Stock: 2

Product no.: Schaltnetzteil5A

switched power supply

input 100-240VAC

output 12-24VDC / 70W

12V/5A , 13V/4.8A , 14V/4.7A , 15V/4.5A , 16V/4.3A , 17V/4.1A , 18V/3.9A , 18,5V , 19V/3.7A ,19,5V/3.7A , 20V/3.5A , 21V/3.35A , 22V/3.2A , 23V/3.1A , 24V/3A 

jacks: (1.35 x 3.5) (1.75 x 4.0) (1.75 x 4.8) (2.1 x 5.5) (2.5 x 5.5) (3.0 x 6.3) (EIAJ-4, 5.0, 1.0 centerl Pin) (EIAJ-5, 6.5, 1.5 center Pin

130 x 65 x 18mm / 240g

42.00 *

Shipment from Stock: 2

Product no.: ES80 gepolsterte Tragetasche
88.00 *

Shipment:
innerhalb 14-21 Tagen lieferbar

Product no.: Vplugbal14fert
31.00 *

Shipment from Stock: 3

Product no.: PX3-K
  • High-performance companion panadapter for the Elecraft KX3 transceiver
  • Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
  • Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
  • Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 

 

755.00 €
735.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-2M-AT

2M All-Mode Internal KX3 Option (User Installed. For KX3's with KXAT3)

338.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-2M-NOATU

2M All-Mode Internal KX3 Option (User Installed. For KX3's with NO KXAT3)

375.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-4M-AT
338.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-4M-NOATU
375.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3Handbuch

german owners manual for the KX3

50.00 *

Shipment from Stock: 99,984

Product no.: proset-K2
209.00 *

Shipment from Stock: 1

Product no.: XG50

The Elecraft XG50 is a simple 49.380 MHz signal source specifically designed for use with the KX3 Extended VFO Temperature Compensation Procedure

63.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KXSERa

Additional RS232 Cable for KX3

50.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KXUSBa

addtional cable for KX3 (KX3 basic has inlcuded one)

50.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: BNC-Banane
5.40 *

Shipment from Stock: 13

Product no.: KX3coolset
25.00 *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: AX1

ELECRAFT AX1
DUAL BAND (+)
WHIP ANTENNA
• High-Q loading coil resonant on 20
and 17 meters—two great bands for
QRP SSB/CW/data operation
• Band selected via slide switch
• Works with your rig’s ATU to
eliminate whip or radial length
adjustments
• 15 meter coverage with ATU
• Disassembles into two pieces
to fit into small “grab & go” bags,
such as the Elecraft ES series
• Includes 13’ (3.3 m) radial wire
(required for transmit use)
You’ve just crested the hill...the
view is amazing. Time to stop,
take a drink, and check out the
bands. Your radio deploys quickly,
but what about your antenna?
This is where our AX1 whip really
shines: getting you on the air in
seconds, from anywhere. Use it
HT-style with a hand-held rig; on a
picnic table with an AXB1 whip
bipod; or with a camera tripod and
an AXT1 tripod adapter. (AX-Line
accessories shown at right.)
Using the AX1 with an ATU
eliminates tedious length
adjustments. Just select a band,
tap the antenna tune switch, and
go for it. A wide-range ATU can
also extend coverage to other
bands, including 15 meters.
Whether you use the AX1 as a
‘stealth’ field antenna, for
pedestrian mobile, or as a versatile
backup, it’ll be ready when you are.

125.00 *

Shipment from Stock: 1

Product no.: AXT1

AXT1
TRIPOD ADAPTER
• Allows any antenna with a BNC
connector to be mounted on a
standard camera tripod
• Includes permanently installed ¼-
20 fastener
• Three spare holes for guy wires or
other hardware

32.00 *

Shipment from Stock: 1

*
Prices incl. VAT, plus delivery
1 - 30 of 35 results