Print

KX2 SSB/CW/DATA 80-10m Fertiggerät

KX2 SSB/CW/DATA 80-10m Fertiggerät

KX2 SSB/CW/DATA 80-10m Fertiggerät

Display per page
Sort by

KX2Handbuch

Product no.: KX2Handbuch
50.00 *
Shipment from Stock: 999,999

KHAT

Product no.: KHAT
22.00 *
Shipment from Stock: 1

KX2 SSB/W/DATA 80-10m Transceiver

Product no.: KX2

Our KX2 “stealth” transceiver can go wherever your imagination takes you. Thanks to state-of-the-art construction techniques, it’s only 5.8 x 2.8 x 1.5” and weighs just 13 ounces—making it the smallest full-featured HF radio on the plan

• 5.8” x 2.8” x 1.5”

• Ultralight grab-and-go station

• 80-10 meters (9 bands)

• SSB / CW / Data

• Up to 10 W TX

• Li-ion battery (optional)

• Amp-hour meter

• Built-in mic and  0.5-W speaker

• Wide-range Internal ATU (optional)

• Perfect for SOTA and field ops
KX

979.00 *
999.00 €
Shipment from Stock: 1

internal wide range ATU

Product no.: KXAT2

With a KXAT2 automatic antenna tuner (ATU) installed, you can use non-resonant and narrow-band antennas. Such antennas are very convenient for field operation. An ATU can improve transmit power transfer and receive sensitivity.

250.00 *
Shipment from Stock: 3

Lithium-Ionen Battery Pack (11V, 2,6Ah) for KX2

Product no.: KXBT2

The KXBT2 battery pack weighs about 4.8 oz, and can provide up to 8 hours of typical transceiver operation and up to 10 W power output.  You can plug in an internal battery and an external supply at the same time, and the radio will operate from whichever is higher in voltage.

75.00 *
Shipment from Stock: 3

external Lithium-Ion fast Charger for KBT2

Product no.: KXBC2

This charger is designed specifically for use with our KXBT2 Li-ion battery pack. It can safely charge the KXBT2 in 1 to 3 hours. Note: To charge the battery, you must first remove it as described in the KX2 owner’s manual. It cannot be charged while inside the radio. The power jack on the left side panel is isolated from the internal power jack, and cannot supply power to the battery.

37.00 *
Shipment from Stock: 3

attached precision keyer paddle

Product no.: KXPD2

The KXPD2 is a very compact mechanical keyer paddle that attaches directly to the front of KX2 (or KX3). This eliminates the need for a heavy keyer base. It includes a slot in which to store the contact-adjustment wrench.

150.00 *
Shipment:
innerhalb 14 Tagen lieferbar

MH3 Hand Microphone for the KX3 with Up/Dn Buttons

Product no.: MH3
88.00 *
Shipment from Stock: 1

KXIO2 RTC & Aux. Outputs

Product no.: KXIO2

The KXIO2 option provides a real-time clock and two user-programmable outputs (AUX jack). The time can be displayed in the KX2’s VFO B area and the TIME menu entry). Time accuracy can be fined-tuned to about +/- 2 seconds per day using the RTC ADJ menu entry. The two AUX outputs can be used for controlling per-band external equipment such as an antenna switch or transverter (see the AUX 1 and AUX 2 menu entries).

100.00 *
Shipment:
innerhalb 14 Tagen lieferbar

KX2GNDPLUG Quick Release Ground Plug

Product no.: KX2GNDPLUG

A mini-banana plug intended to facilitate ease of grounding on the KX2.

9.90 *
Shipment from Stock: 2

KX2ACBL Accessory Cable for AMP Keying

Product no.: KX2ACBL

Used to break out the computer control and key out

signals separately. These can then be connected to an Elecraft KXPA100 amplifier via its adapter cable.

12.50 *
Shipment from Stock: 1

KX3 to KXPA100 Integrated Adapter Cable

Product no.: KXPACBL
Provides Amp Keying, Band Data, and AMP/ATU control from the KX3 to the KXPA100 and KXPA100 status back to KX3. 
 
Includes KX3 to KXPA100 adapt cable (39" - 99cm) and a standard  5' (152cm) Ethernet cable. Longer Ethernet style cables can be used to locate the KXPA100 farther from the KX3.
75.00 *
Shipment:
innerhalb 7-14 Tagen lieferbar

SL SignalLink KX3 Cable

Product no.: VSLKX3KabelVV

SignaLink cable to connect an Elecraft KX3

20.00 *
Shipment:
innerhalb 7 Tagen lieferbar

CS40 Compact Padded Carrying Case

Product no.: CS40 gepolsterte Tragetasche

These padded cases will protect your KX2 and accessories during transport.

The CS40 is just right for carrying the KX2, a wire antenna, earbuds, log sheet, keyer paddle (e.g. KXPD2), and other small items.

The larger CS60 can also accommodate an MH3 microphone and larger antennas or accessories.

50.00 *
Shipment from Stock: 1

ES60 gepolsterte Tragetasche

Product no.: ES60 gepolsterte Tragetasche

These padded cases will protect your KX2 and accessories during transport.

The larger CS60 can also accommodate an MH3 microphone and larger antennas or accessories.

The CS40 is just right for carrying the KX2, a wire antenna, earbuds, log sheet, keyer paddle (e.g. KXPD2), and other small items.

63.00 *
Shipment from Stock: 1

ES80 gepolsterte Tragetasche

Product no.: ES80 gepolsterte Tragetasche
88.00 *
Shipment:
innerhalb 14-21 Tagen lieferbar

BNC Male-Female Right Angle Adapter

Product no.: UG-306U
BNC Male-Female Right Angle Adapter
2.50 *
Shipment from Stock: 10

BNC to Banana plug adapter

Product no.: BNC-Banane
5.40 *
Shipment from Stock: 9

additional USB cable for KX3

Product no.: KXUSBa

addtional cable for KX3 (KX3 basic has inlcuded one)

50.00 *
Shipment:
innerhalb 14 Tagen lieferbar

RS-232 cable for KX3

Product no.: KXSERa

Additional RS232 Cable for KX3

50.00 *
Shipment:
innerhalb 14 Tagen lieferbar

AX1 Dual Band Whip Antenna 20m/17m

Product no.: AX1

ELECRAFT AX1
DUAL BAND (+)
WHIP ANTENNA
• High-Q loading coil resonant on 20
and 17 meters—two great bands for
QRP SSB/CW/data operation
• Band selected via slide switch
• Works with your rig’s ATU to
eliminate whip or radial length
adjustments
• 15 meter coverage with ATU
• Disassembles into two pieces
to fit into small “grab & go” bags,
such as the Elecraft ES series
• Includes 13’ (3.3 m) radial wire
(required for transmit use)
You’ve just crested the hill...the
view is amazing. Time to stop,
take a drink, and check out the
bands. Your radio deploys quickly,
but what about your antenna?
This is where our AX1 whip really
shines: getting you on the air in
seconds, from anywhere. Use it
HT-style with a hand-held rig; on a
picnic table with an AXB1 whip
bipod; or with a camera tripod and
an AXT1 tripod adapter. (AX-Line
accessories shown at right.)
Using the AX1 with an ATU
eliminates tedious length
adjustments. Just select a band,
tap the antenna tune switch, and
go for it. A wide-range ATU can
also extend coverage to other
bands, including 15 meters.
Whether you use the AX1 as a
‘stealth’ field antenna, for
pedestrian mobile, or as a versatile
backup, it’ll be ready when you are.

125.00 *
Shipment from Stock: 1

AXT1 Tripod Adapter

Product no.: AXT1

AXT1
TRIPOD ADAPTER
• Allows any antenna with a BNC
connector to be mounted on a
standard camera tripod
• Includes permanently installed ¼-
20 fastener
• Three spare holes for guy wires or
other hardware

32.00 *
Shipment:
innerhalb 14-21 Tagen lieferbar

AXB1 Whip Bipod tilt stand

Product no.: AXB1

AXB1
WHIP BIPOD
• Prevents tipping of whip due to
light wind or vibration; legs
conform to irregular surfaces
• Use with a right-angle adapter
such as an Elecraft #BNC-RA
• Fold-up legs include holes for
use with tie-downs, if needed
in heavier winds

40.00 *
Shipment from Stock: 3

AX1bundle

Product no.: AX1bundle
193.00 *
Shipment from Stock: 1

AbgleichKX2

Product no.: AbgleichKX2
90.00 *
Shipment from Stock: 999,999

AXE1 40m extender for AX1 Antenna

Product no.: AXE1

AXE1 40m extender

 

extension to use  the AX1 Antenna on 40m and 30m (internal ATU needed!)

 

delivery include:

40m extension coil (15cm)

radial wire (10m)

63.00 *
Shipment:
innerhalb 14-21 Tagen lieferbar
*
Prices incl. VAT, plus delivery