Print

elecraft november specials

elecraft november specials

november special ends at november, 28th 2019


Display per page
Sort by

KX2 SSB/W/DATA 80-10m Transceiver

Product no.: KX2

Our KX2 “stealth” transceiver can go wherever your imagination takes you. Thanks to state-of-the-art construction techniques, it’s only 5.8 x 2.8 x 1.5” and weighs just 13 ounces—making it the smallest full-featured HF radio on the plan

• 5.8” x 2.8” x 1.5”

• Ultralight grab-and-go station

• 80-10 meters (9 bands)

• SSB / CW / Data

• Up to 10 W TX

• Li-ion battery (optional)

• Amp-hour meter

• Built-in mic and  0.5-W speaker

• Wide-range Internal ATU (optional)

• Perfect for SOTA and field ops
KX

979.00 *
999.00 €
Shipment from Stock: 2

Elecraft KX3 Transceiver 160m-6m 10W Ready Built

Product no.: KX3-F

KX3 Transceiver     CE

 

 

 

  • 160-6 meters, SSB/CW/DATA/AM/FM modes
  • 10 W PEP (100 W with KXPA100 amp)
  • Only 1.5 pounds (0.7 kg)
  • Current drain as low as 150 mA
  • Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
  • Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
  • Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
  • Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard output

    ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket,
    also you have to order the ATU or the roofing filter seperately if you want!
    The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 
1,325.00 *
1,350.00 €
Shipment:
innerhalb 7-14 Tagen lieferbar

Elecraft KX3 Transceiver 160m-6m 10W KIT

Product no.: KX3-K

KX3 Transceiver     CE

 

 

 

  • 160-6 meters, SSB/CW/DATA/AM/FM modes
  • 10 W PEP (100 W with KXPA100 amp)
  • Only 1.5 pounds (0.7 kg)
  • Current drain as low as 150 mA
  • Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
  • Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
  • Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
  • Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard outputs

 

  • ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket, also you have to order the ATU or the roofing filter seperately if you want!
  • The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 
    If you install the Roofing Filter KXFL3 yourself, you need a stable -33dBm signal in the middle of any band between 160m and 60m to align for optimal sideband supression.

 

1,225.00 *
1,250.00 €
Shipment:
innerhalb 7-14 Tagen lieferbar

Elecraft PX3 Panorama Adapter for the KX3 (ready assembled)

Product no.: PX3-F
  • High-performance companion panadapter for the Elecraft KX3 transceiver
  • Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
  • Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
  • Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 
780.00 *
800.00 €
Shipment:
innerhalb 14 Tagen lieferbar

Elecraft PX3 Panorama Adapter for the KX3 (kit version)

Product no.: PX3-K
  • High-performance companion panadapter for the Elecraft KX3 transceiver
  • Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
  • Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
  • Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 

 

735.00 *
755.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3/0-Mini Remote Control Unit

Product no.: K3/0-Mini

K3 Remote Control Unit, can only be used to control a complete KX3 remotely.

you need the RRIGSETII and the special cable set to use the K3/0-Mini to remote your K3!

860.00 *
880.00 €
Shipment:
innerhalb 21 Tagen lieferbar

K3S 160m-6m Transceiver 100W Version ready built

Product no.: K3S/100-F

Ready built and tested K3S 100W Version. Built and tested by QRPproject in Berlin. 2 years warranty . Basic k3 with 2k7 Xtal-Filter. Any options can be built in now or later.

3,499.00 *
3,599.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S 160m-6. Transceiver 100W Version (kit)

Product no.: K3S/100-K
3,299.00 *
3,399.00 €
Shipment:
innerhalb 14 Tagen lieferbar

Elecraft KPA1500 Linear Amplifier factory assembled

Product no.: KPA1500-F

KPA1500-F

The KPA1500 solid-state amplifier won’t take over your entire desktop: it’s just 4.5 x 13.5 x 11.5” (HWD; 11.5 x 34 x 29 cm). The lightweight companion power supply can be placed on the floor or in any other convenient location.

The KPA1500's no-nonsense front panel shows all important parameters at a glance, with a high-contrast 32-character LCD and fast, bright LED bar graphs. Band switching is instantaneous, via control inputs or RF sensing. Protection and monitoring circuitry is extensive and foolproof, letting you focus on the job at hand — breaking pileups and overcoming the most difficult operating conditions. And it wouldn’t be an Elecraft amp without robust PIN-diode T/R switching. Like our KPA500, the KPA1500 offers fast QSK without a noisy relay.

The amplifier’s rugged internal ATU can handle full power with load SWR up to 3:1, while a wider matching range is allowed at lower power, including up to 10:1 in standby mode.

When it’s time to make waves, you can rely on the compact, quiet, highly integrated Elecraft KPA1500.

7,000.00 *
7,100.00 €
Shipment:
innerhalb 14 Tagen lieferbar

P3- Elecraft Panoramaadapter Ready Built

Product no.: P3-F

The new P3 Panadapter display adds a visual dimension to signal hunting with fast real time spectrum and waterfall displays of band activity. The P3 offers superior sensitivity and DSP processing, giving you the ability to see signals down to the K3's noise floor.

950.00 *
1,000.00 €
Shipment:
innerhalb 14 Tagen lieferbar

P3- Elecraft Panoramaadapter Bausatz (Kit)

Product no.: P3-K
The new P3 Panadapter display adds a visual dimension to signal hunting with fast real time spectrum and waterfall displays of band activity. The P3 offers superior sensitivity and DSP processing, giving you the ability to see signals down to the K3's noise floor.
900.00 *
950.00 €
Shipment:
innerhalb 14 Tagen lieferbar

CBLP3Y

Product no.: CBLP3Y
45.00 *
50.00 €
Shipment:

High Performance Radio for beginners and Ocasional User

Product no.: K3S-casual-F

K3S casual user Package

ready assembled K3S with 100 Watt

includes:

- 2,7kHz Filter

- KAT3A internernal ATU

- KXV3B Transverter interface

- USB and Serial connection

- Stainless Steel Screws

- MH4 Handmike

- K3S book by Fred Cady

- KHAT (basecap navy blue with elecraft Logo)

 

save over 200,00 EURO against single orders

 

inkl. 2 years warranty by QRPproject

all other optinos can be installed later by your wish

3,990.00 *
4,050.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S Package for DXer

Product no.: K3S-DXer-F

K3S DXer Package

ready assembled K3S 160 bis 6m with 100 Watt

includes:

 - KAT3A internernal 100W ATU

- 2,8kHz High Performance upgrade Filter

- 2,1kHz High Performance SSB / DATA Filter

- 400Hz High Performance CW / DATA Filter

- High Performance SUB Receiver

- 2,8kHz High Performance upgrade Filter (SUB RX)

- 400Hz High Performance CW / DATA Filter(SUB RX)

- KXV3B Transverter interface

- USB und Serial connection

- Stainless Steel Screws

- MH4 Handmike

- P3 Panorama-Adapter

- KHAT (basecap navy blue with elecraft Logo)

 

Save 300,00 EURO against single orders

 

incl. 2 years warranty by QRPproject

other modules can installed later by your wish

6,640.00 *
6,730.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S contester package

Product no.: K3S-Contester/DXer-F

K3S Contester Package - der "Pile up buster"

ready assembled K3S 160 bis 6m with 100 Watt

includes:

- KDVR3 digital Voice Recorder

- KAT3A internernal 100W ATU

- 2,8kHz High Performance upgrade Filter

- 2,1kHz High Performance SSB / DATA Filter

- 400Hz High Performance CW / DATA Filter

- 200Hz High Performance CW / DATA Filter

- High Performance SUB Receiver

- 2,8kHz High Performance upgrade Filter (SUB RX)

- 400Hz High Performance CW / DATA Filter (SUB RX)

- KXV3B Transverter interface

- USB und Serial connection

- Stainless Steel screws

- MH4 handmike

- P3 Panorama-Adapter

- P3SVGA Video Adapter for P3

- KHAT (basecap navy blue with elecraft Logo)

 

Save 360,00 EURO against single orders

 

incl. 2 years warranty by QRPproject

all additonal options can be installed later by your wish

7,320.00 *
7,460.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S-casual-K

Product no.: K3S-casual-K
3,790.00 *
3,850.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S-DXer-K

Product no.: K3S-DXer-K
6,390.00 *
6,480.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K3S-Contester/DXer-K

Product no.: K3S-Contester/DXer-K
7,070.00 *
7,210.00 €
Shipment:
innerhalb 14 Tagen lieferbar

PWRCOMBO-F

Product no.: PWRCOMBO-F
3,615.00 *
3,640.00 €
Shipment:
innerhalb 14 Tagen lieferbar

Elecraft KPA500 Linear Amplifier + KAT500 ATU (kit version)

Product no.: PWRCOMBO-K

KPA500-F (ready assembled)

160-6M, solid state linear amplifier

automatic band switching with internal frequency counter
sam size like the K3S / K3
12 kg
QSK
internal power supply adjustable 100-125V, 200-250V
 

KAT500-F (ready assembled)
mathces approx 10:1 SWR bei 500-600 W, 3:1 SWR at 1000 W.

save 80,00 EURO against single order

3,365.00 *
3,390.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K2 100W PA Kit

Product no.: KPA100
K2 100W PA, can be mounted inside K2 or into an external EC2 Enclosure (in this case you will need the KIO2)
790.00 *
815.00 €
Shipment:
innerhalb 14 Tagen lieferbar

K2 SSB Module Kit

Product no.: KSB2
SSB Option for the K2. Completes the Basic K2 with SSB, also needed for PSK like Digi Modes.
230.00 *
250.00 €
Shipment:
innerhalb 14 Tagen lieferbar

KIO3B Upgrade Kit for K3

Product no.: KIO3BUPKT

KIO3B Upgrade Kit for K3

Three Board Set. Includes new KIO3B Main, Analog and Digital boards. Adds USB Sound and Comm port capability. Also includes the standard KIO3 Analog and digital I/O. 
Includes: KIO3B 3 board set, RJ45-RS232 cable, USB cable, h/w and manual.
For more details, please see: KIO3B FAQ
If you have an earlier P3 that does not have the CBLP3Y P3 to RJ45 connector cable, we recommend you order it below to allow full USB computer comm port operation with the K3, KIO3B and P3.

 

 

 

480.00 *
500.00 €
Shipment:
innerhalb 14 Tagen lieferbar

KSYN3A upgrade board

Product no.: KSYN3AUPG

ATTENTION: Due to the high number of orders, our stock is empty. New KSYN3A will be available again early in April 2015

KSYN3A Synthesizer Upgrade Kit for K3, KRX3 (Note: Synthesizers used for the K3 and the KRX3 must both be the same model. K3's with the KRX3 will need to upgrade both (2 total) synthesizers to the KSYN3A.)

The KSYN3A is included on all new K3s shipped starting 1/23/2015, s/n 8801 and later.

The KSYN3A synthesizer module is a completely new design that improves on the original KSYN3 in several ways:

ULTRA-LOW PHASE NOISE The KSYN3A significantly improves the K3's already excellent RX and TX phase noise at close carrier spacings. This in turn noticeably improves the K3's top performing close spaced Rx dynamic range, yielding even better weak signal detection in the presence of strong signals.

FASTER CW BREAK-IN AND MORE ACCURATE CW ELEMENT TIMING

EXCELLENT MECHANICAL STABILITY The KSYN3A is virtually immune to both physical vibration and magnetic coupling, and operates over a very wide temperature range.

600-METER COVERAGE The KSYN3A extends VFO tuning down to 100 kHz, with sensitivity gradually falling off below 450 kHz. Transmit output is as high as 1.0 mW for use with a suitable external amplifier. (Note: 600-m and below operation also requires the KBPF3 and KXV3 options.)

355.00 *
375.00 €
Shipment:
innerhalb 21 Tagen lieferbar
*
Prices incl. VAT, plus delivery