Print

Elecraft K3S ready built

Elecraft K3S ready built

Elecraft K3S ready built

Internal options ordered with the factory assembled  KX3-F are installed at time of build at the factory. If later ordered options should installed by QRPproejct, please order the assembling service (KX3_Einbau_Service) at the same time!


Display per page
Sort by
31 - 43 of 43 results
Product no.: SLK3KabelVV
SignalLink cable to connect an Elecraft K3
20.00 *

Shipment:

Product no.: KUSB3
15.00 *

Shipment:

Product no.: MC43mikro
42.00 *

Shipment:

Product no.: Vbalun100
Balun 1:4 100Watt, ReadyBuilt. Connected to asymetric ATU by PL/PL adapter (included)
47.00 *

Shipment from Stock: 1

Product no.: PR6-10
213.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KSYN3AUPG

ATTENTION: Due to the high number of orders, our stock is empty. New KSYN3A will be available again early in April 2015

KSYN3A Synthesizer Upgrade Kit for K3, KRX3 (Note: Synthesizers used for the K3 and the KRX3 must both be the same model. K3's with the KRX3 will need to upgrade both (2 total) synthesizers to the KSYN3A.)

The KSYN3A is included on all new K3s shipped starting 1/23/2015, s/n 8801 and later.

The KSYN3A synthesizer module is a completely new design that improves on the original KSYN3 in several ways:

ULTRA-LOW PHASE NOISE The KSYN3A significantly improves the K3's already excellent RX and TX phase noise at close carrier spacings. This in turn noticeably improves the K3's top performing close spaced Rx dynamic range, yielding even better weak signal detection in the presence of strong signals.

FASTER CW BREAK-IN AND MORE ACCURATE CW ELEMENT TIMING

EXCELLENT MECHANICAL STABILITY The KSYN3A is virtually immune to both physical vibration and magnetic coupling, and operates over a very wide temperature range.

600-METER COVERAGE The KSYN3A extends VFO tuning down to 100 kHz, with sensitivity gradually falling off below 450 kHz. Transmit output is as high as 1.0 mW for use with a suitable external amplifier. (Note: 600-m and below operation also requires the KBPF3 and KXV3 options.)

375.00 €
375.00 *

Shipment:
innerhalb 21 Tagen lieferbar

Product no.: K3SSKT
K3 Stainless Steel Exterior H/W Kit
Black stainless steel exterior K3 screw, nut and h/w set for use in corrosive environments (marine, extreme humidity etc.)
38.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KIO3BUPKT

KIO3B Upgrade Kit for K3

Three Board Set. Includes new KIO3B Main, Analog and Digital boards. Adds USB Sound and Comm port capability. Also includes the standard KIO3 Analog and digital I/O. 
Includes: KIO3B 3 board set, RJ45-RS232 cable, USB cable, h/w and manual.
For more details, please see: KIO3B FAQ
If you have an earlier P3 that does not have the CBLP3Y P3 to RJ45 connector cable, we recommend you order it below to allow full USB computer comm port operation with the K3, KIO3B and P3.

 

 

 

500.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K3S_EINBAU_Service
50.00 *

Shipment from Stock: 999,999

Product no.: NEOGRIP
25.00 *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K-PODAUX
20.00 *

Shipment:
innerhalb 14-21 Tagen lieferbar

Product no.: KHAT
22.00 *

Shipment from Stock: 2

Product no.: AbgleichK3
90.00 *

Shipment from Stock: 999,999

*
Prices incl. VAT, plus delivery
31 - 43 of 43 results