Specs
The following performance specifications are guaranteed only within the Amateur bands.
Frequency Range All Amateur bands from 1.8 to 29.7 MHz and 50 to 54 MHz
Supply Voltage and Current 195 to 250 VAC, 50/60 Hz up to 20A
RF Deck Weight 22 lbs. (10 kg)
RF Deck Size Enclosure only, 4.5 x 13.5 x 11.5 in., HWD (11.5 x 34 x 29 cm)
Power Supply Weight 17 lbs. (7.5 kg)
Power Supply Size Same as RF Deck: Enclosure only, 4.5 x 13.5 x 11.5 in., HWD (11.5 x 34 x 29 cm) excluding feet and protrusions
Power Output 1500 W PEP CW/SSB/Data
Duty Cycle at 1500 Watts 100% ICAS for 100% duty cycle modulation modes (FM, RTTY, FT8, JT65, etc.)
1.8-30 MHz: Maximum 5 minutes key down / Minimum 5 minutes receive (after 5 minute TX)
50 MHz: Maximum 50 seconds key down / Minimum 50 seconds receive
Drive Power 50-60 W, typical, for 1500 W output
Input VSWR Less than 1.5:1
ALC Out Negative-going, adjustable
Metering Power output, SWR (bargraph and on the LCD display), supply voltage and current, temperature, frequency band
Heat Sink Temperature 230° F (110°C), maximum
Key In (Transmit Enable) +5V maximum, open circuit on receive, closed to ground on transmit (5 mA max.)
Efficiency Approximately 50%
