Frequency Range

All Amateur bands from 1.8 to 29.7 MHz and 50 to 54 MHz

Supply Voltage and Current

195 to 250 VAC, 50/60 Hz up to 20A

RF Deck Weight

22 lbs. (10 kg)

RF Deck Size

Enclosure only, 4.5 x 13.5 x 11.5 in., HWD (11.5 x 34 x 29 cm)

Power Supply Weight

17 lbs. (7.5 kg)

Power Supply Size

Same as RF Deck: Enclosure only, 4.5 x 13.5 x 11.5 in., HWD (11.5 x 34 x 29 cm) excluding feet and protrusions

Power Output

1500 W PEP CW/SSB/Data

Duty Cycle at 1500 Watts

100% ICAS for 100% duty cycle modulation modes (FM, RTTY, FT8, JT65, etc.)

1.8-30 MHz: Maximum 5 minutes key down / Minimum 5 minutes receive (after 5 minute TX)

50 MHz: Maximum 50 seconds key down / Minimum 50 seconds receive

Drive Power

50-60 W, typical, for 1500 W output

Input VSWR

Less than 1.5:1

ALC Out

Negative-going, adjustable

Metering

Power output, SWR (bargraph and on the LCD display), supply voltage and current, temperature, frequency band

Heat Sink Temperature

230° F (110°C), maximum

Key In (Transmit Enable)

+5V maximum, open circuit on receive, closed to ground on transmit (5 mA max.)

Efficiency

Approximately 50%