Print

Elecraft K2 10m-160m Transceiver Kit

Elecraft K2 10m-160m Transceiver Kit

Elecraft K2 10m-160m Transceiver Kit

 

 


Display per page
Sort by

Product no.: MH4
80.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KHAT
20.00 € *

Shipment from Stock: 4

Product no.: k2
980.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KAT2
Internal ATU for K2 with two independent Antenna connectors (BNC) Can only be used inside K2.
275.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KSB2
SSB Option for the K2. Completes the Basic K2 with SSB, also needed for PSK like Digi Modes.
210.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: VK2SSBEL
modification of the SSB board
5.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K160RX
90.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KAF2
K2 internal Filter and clock
147.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KIO2
Internal RS232 Interface for the K2. Needed to connect a PC or peripherals like the Elecraft Transverters or an external KPA100.
130.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KNB2
95.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K60XV
K60XV - 60m and Transverter Adapter
125.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: VKBT2X+Akku
K2 internal Batterieholder complete with 2,2Ah Pb Dry Akkumulator
115.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KBT2X
Internal K2 Batterieholder for a 2,2Ah Pb Dry Akkumulator. No extra Batteriecharger needed.
69.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: Vplugbal14fert
31.00 € *

Shipment from Stock: 2

Product no.: Vk2zfadapterBestückt
Small Kit do provide the K2 with a buffered IF Output. Installation with or without Noiseblanker possible.

All SMT parts will be soldered by us after your order has been placed.

This Kit may be used for other rigs as well. Supply: 10V
15.00 € *

Shipment:

Product no.: Vk2zfadapter
Small Kit do provide the K2 with a buffered IF Output. Installation with or without Noiseblanker possible.

This Kit may be used for other rigs as well. Supply: 10V
9.50 € *

Shipment:

Product no.: KPA100
K2 100W PA, can be mounted inside K2 or into an external EC2 Enclosure (in this case you will need the KIO2)
699.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KAT100-1

External ATU for K2. Can only be used with a K2 or K2/100. Flat enclosure

380.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: proset-K2
220.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: BleiGelAkkuK2
Blei-Gel-Akkumulater special for the internal Batterieholder of K2
29.90 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KUSB3
15.00 € *

Shipment from Stock: 1

Product no.: Schaltnetzteil5A

switched power supply

input 100-240VAC

output 12-24VDC / 70W

12V/5A , 13V/4.8A , 14V/4.7A , 15V/4.5A , 16V/4.3A , 17V/4.1A , 18V/3.9A , 18,5V , 19V/3.7A ,19,5V/3.7A , 20V/3.5A , 21V/3.35A , 22V/3.2A , 23V/3.1A , 24V/3A 

jacks: (1.35 x 3.5) (1.75 x 4.0) (1.75 x 4.8) (2.1 x 5.5) (2.5 x 5.5) (3.0 x 6.3) (EIAJ-4, 5.0, 1.0 centerl Pin) (EIAJ-5, 6.5, 1.5 center Pin

130 x 65 x 18mm / 240g

42.00 € *

Shipment from Stock: 2

Product no.: Schaltnetzteil 23A
Switched Powersupplyl 23A, 25A Peak special design for Radio applications. Extrem low noiselevel ar RF Frequencies.Best for Elecraft K2/100, K3 and other Transceivers.
Input: bis 240 V~ 50 Hz
Out: 13,3 - 14,5 V DC (can be adjusted)
Status-LED
Cooled by big Aluminiumbloc Internal Low Noise Fan, only activ in high duty situations.

Enclosure: Steel black
181x63x190 1,7 Kg
CE, EN 60960, EN 55022.
109.00 € *

Shipment from Stock: 16

Product no.: KRC2

The Elecraft KRC2 Band Decoder is a universal, programmable station control unit that can switch any combination of antennas, filters, amplifiers, or other equipment. It supports analog, digital, and RS232 control inputs

220.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: Vbalun100
Balun 1:4 100Watt, ReadyBuilt. Connected to asymetric ATU by PL/PL adapter (included)
47.00 € *

Shipment from Stock: 1

Product no.: Vfuchs
Portable ATU for Lambda/2 Wire Antennas. Max. Power 15 Watt, Kit
42.00 € *

Shipment from Stock: 2

* Prices incl. VAT, plus delivery