Print

K3S Kit

K3S Kit

K3S Kit

 

 

Display per page
Sort by
1 - 30 of 43 results
Product no.: K3/100-DemoGerät

Our 2nd DEMO K3 which was exhibited only twice on the HAM Radio amateur radio show as a sample. Otherwise he was neatly packed in a box.

In principle, like new.

Domestic equipments:

 

K3/100-F - 100W TRX fertig aufgebaut

KFL3A-2.8_2.7SW - 2k8 roofingfilter

KAT3A  - interne ATU mit 2 Antennenanschlüssen

KXV3A - Transverter Ausgangsmodul mit RX Antennen Ein- und Ausgang sowie ZF Ausgang

KDVR3 - voice recorder

 

TRX freshly checked and adjusted

further options can be retrofitted, and can be ordered at the same time

3,100.00 € *

Shipment from Stock: 1

Product no.: K3S/100-K
3,365.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K3S/10-K

K3S Premounted and complete aligned Kit, 10 Watt Version. Solderfree assembling. All available additional modules can be installed at any time.

2,720.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: MH4
80.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: K-POD

K•Pod Control Panel for the K3S & K3

 

Precision, Weighted Tuning Knob

16 Programmable Switch Functions

USB Port for Firmware Upgrades, Future Expansion

3 Utility Outputs

 

A Compact Accessory Panel for Contesting, DXing, and Customized Station Control

Our new K-Pod is the ideal companion to your Elecraft K3 or K3S Transceiver, maximizing both convenience and operating efficiency. At only 3.5 x 3 x 1 inches (9 x 7.5 x 2.5 cm), it can be placed anywhere the action is, typically next to a computer keyboard. It’s versatile enough to integrate transceiver and station control functions, putting you in command as never before.

 

A utility jack beneath the radio’s front panel acts as the K-Pod’s data interface. The unit can be powered from the radio’s rear 12-V accessory output, the pod’s own USB port, or any 8-15 V, 50-mA DC power source.

 

now preorder possible

310.00 € *

Shipment:
innerhalb 14-21 Tagen lieferbar

Product no.: KRX3A
890.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KAT3A
490.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KBPF3A
230.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KDVR3

Digital Voice Recorder, ready assembled to be mounted into a K3

195.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KTCXO3-1

alternativ for the 5ppm standard oscillator

150.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K144XV
475.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K144RFLK
This option phase locks the local oscillators in the K144XV to the KREF3 master reference oscillator in the K3.
The circuitry is contained on the K144XV Phase Lock Board that mounts onto the K144XV pc board inside the
K144XV 2-Meter module enclosure. No soldering is required to install this option.
125.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K3EXREF
135.00 € *

Shipment:

Product no.: NEOGRIP
24.00 € *

Shipment from Stock: 1

Product no.: KXV3B
249.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: SS30DV
149.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: SP3

SP3 Matching External Speaker

 
High Performance Matching Speaker for the K3S & K3 designed by audio expert Dr. Bruce Edgar (link to article on Bruce). Two rear inputs with front panel switch for selecting between different radio sources and a rear output jack for a adding a second speaker (stereo)

 

228.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: SP3_2nd
228.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: K3SHandbuch
55.00 € *

Shipment from Stock: 999,992

Product no.: KPA3A
K3 100 W PA for an allready existent K3. Allready assembled, solderfree mounting.
745.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KRC2

The Elecraft KRC2 Band Decoder is a universal, programmable station control unit that can switch any combination of antennas, filters, amplifiers, or other equipment. It supports analog, digital, and RS232 control inputs

220.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: Schaltnetzteil 23A
Switched Powersupplyl 23A, 25A Peak special design for Radio applications. Extrem low noiselevel ar RF Frequencies.Best for Elecraft K2/100, K3 and other Transceivers.
Input: bis 240 V~ 50 Hz
Out: 13,3 - 14,5 V DC (can be adjusted)
Status-LED
Cooled by big Aluminiumbloc Internal Low Noise Fan, only activ in high duty situations.

Enclosure: Steel black
181x63x190 1,7 Kg
CE, EN 60960, EN 55022.
109.00 € *

Shipment from Stock: 16

Product no.: KSYN3AUPG

ATTENTION: Due to the high number of orders, our stock is empty. New KSYN3A will be available again early in April 2015

KSYN3A Synthesizer Upgrade Kit for K3, KRX3 (Note: Synthesizers used for the K3 and the KRX3 must both be the same model. K3's with the KRX3 will need to upgrade both (2 total) synthesizers to the KSYN3A.)

The KSYN3A is included on all new K3s shipped starting 1/23/2015, s/n 8801 and later.

The KSYN3A synthesizer module is a completely new design that improves on the original KSYN3 in several ways:

ULTRA-LOW PHASE NOISE The KSYN3A significantly improves the K3's already excellent RX and TX phase noise at close carrier spacings. This in turn noticeably improves the K3's top performing close spaced Rx dynamic range, yielding even better weak signal detection in the presence of strong signals.

FASTER CW BREAK-IN AND MORE ACCURATE CW ELEMENT TIMING

EXCELLENT MECHANICAL STABILITY The KSYN3A is virtually immune to both physical vibration and magnetic coupling, and operates over a very wide temperature range.

600-METER COVERAGE The KSYN3A extends VFO tuning down to 100 kHz, with sensitivity gradually falling off below 450 kHz. Transmit output is as high as 1.0 mW for use with a suitable external amplifier. (Note: 600-m and below operation also requires the KBPF3 and KXV3 options.)

299.00 € *

Shipment from Stock: 2

Product no.: VSUBD15
1.90 € *

Shipment from Stock: 4

Product no.: P3-K
The new P3 Panadapter display adds a visual dimension to signal hunting with fast real time spectrum and waterfall displays of band activity. The P3 offers superior sensitivity and DSP processing, giving you the ability to see signals down to the K3's noise floor.
890.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: P3SVGA
365.00 € *

Shipment:

Product no.: P3TXMON

TX  Monitor Power and Waveform Display Adapter for the P3   

 

at least you need one directional coupler, which have to be ordered seperately.

- coupler for 0.1-200 W 1-54 MHz (DCHF-200A)

coupler for 1-2000W 1-54 MHz (DCHF-2000A)

coupler for 1-200W 144-450 MHz (DCV/U-200A)

75.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: DCHF-200a
Sensor / 50 Ohm probe for Elecraft W2
1-54 MHz 0,1-200W

180.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: DCHF-2000a
Sensor 50 Ohm Probe for Elecraft W2
1-54 MHz 1-2000W
180.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: DCV/U-200a
Sensor/ 50 Ohm probe for Elecraft W2
144-450 MHz 1-200W
180.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

* Prices incl. VAT, plus delivery
1 - 30 of 43 results