Print

KX3 Allband Allmode 160-6m Factory Built

KX3 Allband Allmode 160-6m Factory Built

KX3 Allband Allmode 160-6m Factory Built

Internal options ordered with the factory assembled  KX3-F are installed at time of build at the factory. If later ordered options should installed by QRPproejct, please order the assembling service (KX3_Einbau_Service) at the same time!


Display per page
Sort by
Product no.: KHAT
20.00 € *

Shipment from Stock: 4

Product no.: KX3-F

KX3 Transceiver     CE

 

 

 

  • 160-6 meters, SSB/CW/DATA/AM/FM modes
  • 10 W PEP (100 W with KXPA100 amp)
  • Only 1.5 pounds (0.7 kg)
  • Current drain as low as 150 mA
  • Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
  • Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
  • Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
  • Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard output

    ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket,
    also you have to order the ATU or the roofing filter seperately if you want!
    The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 
1,335.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXAT3

8-inductor/8-capacitor L-network provides very wide matching range and fast tuning.

Multiple per-band memories provide nearly instant re-tune. Operates even in receive, improving selectivity ahead of receiver.

Includes filter elements to optimize AM broadcast band receive (0.5-1.6 MHz).

249.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXFL3

Adds high-performance, hand-trimmed roofing filters ahead of the receiver's DSP subsystem, resulting in improved close-spaced dynamic range in CW, data, and SSB modes. 500 Hz/1500 Hz matched analog filters (1000/3000 Hz equivalent IF passband in I and Q channels).

189.00 € *

Shipment from Stock: 3

Product no.: KXBC3

Safely and automatically charges 8 NiMH cells in the KX3's internal 8-AA battery pack from an external 12-15 V supply.

Charge time varies depending on cell capacity and depth of discharge; 8 hours typical. Includes real-time clock, providing time display and alarm.

105.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: MH3
80.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: proset-K2
220.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KXPD3
162.00 € *

Shipment:
innerhalb 7-14 Tagen lieferbar

Product no.: KXPD2

The KXPD2 is a very compact mechanical keyer paddle that attaches directly to the front of KX2 (or KX3). This eliminates the need for a heavy keyer base. It includes a slot in which to store the contact-adjustment wrench.

145.00 € *

Shipment from Stock: 1

Product no.: Vplugbal14fert
31.00 € *

Shipment from Stock: 3

Product no.: UG-306U
BNC Male-Female Right Angle Adapter
2.50 € *

Shipment from Stock: 18

Product no.: klinkeadapter
3.50 € *

Shipment from Stock: 4

Product no.: BNC-Banane
5.40 € *

Shipment from Stock: 20

Product no.: VSLKX3KabelVV

SignaLink cable to connect an Elecraft KX3

20.00 € *

Shipment:
innerhalb 7 Tagen lieferbar

Product no.: Schaltnetzteil5A

switched power supply

input 100-240VAC

output 12-24VDC / 70W

12V/5A , 13V/4.8A , 14V/4.7A , 15V/4.5A , 16V/4.3A , 17V/4.1A , 18V/3.9A , 18,5V , 19V/3.7A ,19,5V/3.7A , 20V/3.5A , 21V/3.35A , 22V/3.2A , 23V/3.1A , 24V/3A 

jacks: (1.35 x 3.5) (1.75 x 4.0) (1.75 x 4.8) (2.1 x 5.5) (2.5 x 5.5) (3.0 x 6.3) (EIAJ-4, 5.0, 1.0 centerl Pin) (EIAJ-5, 6.5, 1.5 center Pin

130 x 65 x 18mm / 240g

42.00 € *

Shipment from Stock: 4

Product no.: PX3-F
  • High-performance companion panadapter for the Elecraft KX3 transceiver
  • Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
  • Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
  • Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 
739.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-PCKT

The KX3-PCKT cable set interfaces between the Elecraft KX3 and personal computers, and provides convenient connection to an external foot switch and RF power amplifier.

 

29.00 € *

Shipment:
innerhalb 3 Tagen lieferbar

Product no.: KX3-4M-NOATU
362.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-4M-AT
332.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-2M-NOATU

2M All-Mode Internal KX3 Option (User Installed. For KX3's with NO KXAT3)

362.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KX3-2M-AT

2M All-Mode Internal KX3 Option (User Installed. For KX3's with KXAT3)

332.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: SMA-BNC

Adapter cable RG316 with SMA male to BNC female. 15cm long pigtail.

11.00 € *

Shipment from Stock: 53

Product no.: KX3Handbuch

german owners manual for the KX3

50.00 € *

Shipment from Stock: 99,986

Product no.: AbgleichKX3
50.00 € *

Shipment from Stock: 999,999

Product no.: KX3_EINBAU_Service

installation of later ordered options in KX3 by QRPproject

50.00 € *

Shipment from Stock: 999,999

Product no.: KXSERa

Additional RS232 Cable for KX3

41.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

Product no.: KXUSBa

addtional cable for KX3 (KX3 basic has inlcuded one)

41.00 € *

Shipment:
innerhalb 14 Tagen lieferbar

* Prices incl. VAT, plus delivery