Print

Antenna and antenna analyser

Antennas and Antenna Measurement

Antennas and Antenna Measurement

Display per page
Sort by

HFP1

Product no.: HFP1
HFP-1
Follow up of the legendary MP1 Portabel Vertical incl. 80m Coil. Operational Length abt. 2,25m (50MHz-7MHz), 2,40m (3,5MHz) Max power 200W. Transport Length only 37cm.
109.00 *
Shipment from Stock: 4

Tripoid for HF-P1

Product no.: HFP1Standfuss
Tripoid for HFP1, 30cm legs
33.00 *
Shipment:

Transport bag for HF-P1

Product no.: HFP1Tasche
19.00 *
Shipment from Stock: 1

Beta Match Kit for MP1 and HFP1 for 7 MHz

Product no.: VBeta-MatchBausatz

Beta-Match kit for MP-1 and HF-P1

Under certain earth conditions the length of the coaxial cable is unusually sensitive to the tuning, at the same time the foot resistance at the resonance frequency is in the range of 20-25 Ohm. I could observe the whole thing especially on 40m, but not yet on the higher bands. The solution to use 4 10m long radials is a little reluctant for me, because it counteracts the main advantage of the MP1. I've found another solution that always works in extreme conditions at the first go: A beta match directly to the foot and a mantle wave barrier directly behind it.

The whole thing fits into the Fuchskreis housing and can be screwed directly onto the MP-1/HF-P1 foot.

Kit contains all necessary components incl. drilled housing and self adhesive label

25.00 *
Shipment:

Beta Match Kit for MP1 and HFP1 for 7 MHz (factory assembled)

Product no.: VBeta-MatchFERTIG

Beta-Match for MP-1 and HF-P1 (ready to use)

Under certain earth conditions the length of the coaxial cable is unusually sensitive to the tuning, at the same time the foot resistance at the resonance frequency is in the range of 20-25 Ohm. I could observe the whole thing especially on 40m, but not yet on the higher bands. The solution to use 4 10m long radials is a little reluctant for me, because it counteracts the main advantage of the MP1. I've found another solution that always works in extreme conditions at the first go: A beta match directly to the foot and a mantle wave barrier directly behind it.

FACTORY ASSEMBLED

39.00 *
Shipment from Stock: 3

AX1bundle

Product no.: AX1bundle
195.00 *
Shipment from Stock: 3

AX1 Dual Band Whip Antenna 20m/17m

Product no.: AX1

ELECRAFT AX1
DUAL BAND (+)
WHIP ANTENNA
• High-Q loading coil resonant on 20
and 17 meters—two great bands for
QRP SSB/CW/data operation
• Band selected via slide switch
• Works with your rig’s ATU to
eliminate whip or radial length
adjustments
• 15 meter coverage with ATU
• Disassembles into two pieces
to fit into small “grab & go” bags,
such as the Elecraft ES series
• Includes 13’ (3.3 m) radial wire
(required for transmit use)
You’ve just crested the hill...the
view is amazing. Time to stop,
take a drink, and check out the
bands. Your radio deploys quickly,
but what about your antenna?
This is where our AX1 whip really
shines: getting you on the air in
seconds, from anywhere. Use it
HT-style with a hand-held rig; on a
picnic table with an AXB1 whip
bipod; or with a camera tripod and
an AXT1 tripod adapter. (AX-Line
accessories shown at right.)
Using the AX1 with an ATU
eliminates tedious length
adjustments. Just select a band,
tap the antenna tune switch, and
go for it. A wide-range ATU can
also extend coverage to other
bands, including 15 meters.
Whether you use the AX1 as a
‘stealth’ field antenna, for
pedestrian mobile, or as a versatile
backup, it’ll be ready when you are.

125.00 *
Shipment from Stock: 3

AXT1 Tripod Adapter

Product no.: AXT1

AXT1
TRIPOD ADAPTER
• Allows any antenna with a BNC
connector to be mounted on a
standard camera tripod
• Includes permanently installed ¼-
20 fastener
• Three spare holes for guy wires or
other hardware

32.00 *
Shipment from Stock: 4

AXB1 Whip Bipod tilt stand

Product no.: AXB1

AXB1
WHIP BIPOD
• Prevents tipping of whip due to
light wind or vibration; legs
conform to irregular surfaces
• Use with a right-angle adapter
such as an Elecraft #BNC-RA
• Fold-up legs include holes for
use with tie-downs, if needed
in heavier winds

40.00 *
Shipment from Stock: 4

vAktivantenne

Product no.: vAktivantenne
58.00 *
Shipment from Stock: 5

vFSW

Product no.: vFSW
29.00 *
Shipment from Stock: 3

DL-1 Elecraft 25W Dummy Load Kit

Product no.: DL1
Elecraft 25W Dummy Load 50 Ohm
38.00 *
Shipment:
innerhalb 14 Tagen lieferbar

BNC to BNC connector

Product no.: bncst-bncst
2.60 *
Shipment from Stock: 23

BNC Male-Female Right Angle Adapter

Product no.: UG-306U
BNC Male-Female Right Angle Adapter
2.50 *
Shipment from Stock: 11

BNC to Banana plug adapter

Product no.: BNC-Banane
5.40 *
Shipment from Stock: 23

PL-PL connector

Product no.: plst-plst
PL-PL connector, PTFE isolation, gold plated contact
2.20 *
Shipment from Stock: 20

Dip It - the ultimate Dip-Meter

Product no.: VDipIt
Complete Kit for the most sensitive Dipmeter you ever have seen. Contains all parts and a ready punched unpainted enclosure.
153.00 *
Shipment:
innerhalb 14-28 Tagen lieferbar

50 Ohm Bridge for DipIt

Product no.: VDipAnalyzer
Easy but helpull: 50 Ohm Wheatstone RF bridge with amplified Display as an AdOn for our Dipmeter. The Resonate Frequency of an Antenna can be detected fast and easy.
32.00 *
Shipment:
* Prices incl. VAT, plus delivery