KX3 Transceiver     

• 160-6 meters, SSB/CW/DATA/AM/FM modes
• 10 W PEP (100 W with KXPA100 amp)
• Only 1.5 pounds (0.7 kg)
• Current drain as low as 150 mA
• Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
• Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
• Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
• Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard output
  
  ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket, also you have to order the ATU or the roofing filter seperately if you want!
  The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 

KX3 Transceiver     

• 160-6 meters, SSB/CW/DATA/AM/FM modes
• 10 W PEP (100 W with KXPA100 amp)
• Only 1.5 pounds (0.7 kg)
• Current drain as low as 150 mA
• Internal wide-range antenna tuner (ATU) and battery options; built-in speaker
• Advanced DSP provides dual watch, noise reduction, noise blanking, auto-notch, stereo audio effects
• Software-defined radio (SDR) architecture plus roofing filters (KXFL3) for excellent dynamic range
• Operates in data modes (PSK31/RTTY) with or without a PC; includes RX I/Q soundcard outputs

• ATTENTION: The Microphon is optional! If you want it, you find it below, put it into the basket, also you have to order the ATU or the roofing filter seperately if you want!
• The antenny you see on the KX3 picture ist only for demonstration, it´s NOT available from Elecraft or QRPproject! 
  If you install the Roofing Filter KXFL3 yourself, you need a stable -33dBm signal in the middle of any band between 160m and 60m to align for optimal sideband supression.

KX3 PACK (factory assembled)
$50 Savings

• KX3 160-6m Transceiver
• KXAT3 Internal, 20-W Automatic ATU
• KXBC3 Internal Charger/Real-Time Clock
• MH3 Hand Microphone
• ES60 carry bag
• Elecraft Logo Hat

KXPD2 Precision Keyer Paddle and Antenna not included!

• KX3 160-6m Transceiver
• KXAT3 Internal, 20-W Automatic ATU
• KXBC3 Internal Charger/Real-Time Clock
• MH3 Hand Microphone
• ES60 carry bag
• Elecraft Logo Hat

KXPD2 Precision Keyer Paddle not included.

KX3/PX3 COMBO Shack in a Pack
 

• KX3 160-6m Transceiver
• KXFL3 roofing filter
• KXAT3 internal ATU
• PX3 Panadapter
• MH3 Hand Microphone
• KX3-PCKT cable set
• ES80 carry bag
• "The KX-Line" Book by Fred Cady
• BNC male / female right angle adapter
• BNC M-Binding Posts
• BNC male  UHF female Adapter
• elecraft Logo Basecap

AX1 Antenna not included

save 50,00 EURO against single order

KX3/PX3 COMBO Shack in a Pack
 

• KX3 160-6m Transceiver
• KXFL3 roofing filter
• KXAT3 internal ATU
• PX3 Panadapter
• MH3 Hand Microphone
• KX3-PCKT cable set
• ES80 carry bag
• "The KX-Line" Book by Fred Cady
• BNC male / female right angle adapter
• BNC M-Binding Posts
• BNC male  UHF female Adapter
• elecraft Logo Basecap

AX1 Antenna not included

save 50,00 EURO against single order

• High-performance companion panadapter for the Elecraft KX3 transceiver
• Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
• Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
• Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 

• High-performance companion panadapter for the Elecraft KX3 transceiver
• Full-color waterfall and spectrum displays, with fast sweep and excellent sensitivity
• Simple plug-and-play operation—no PC, soundcard, software drivers or setup required
• Weighs just 13 oz (0.37 kg); enclosure size: 5.4 x 3.4 x 1.7” (13.7 x 8.6 x 4.3 cm) 

KXPA100 features include:

• 100 W output on 160-6 m with 5 W input typical
• 13.8 VDC powered; 20 A typical current drain
• 7 lbs with KXAT100 installed.  10 x 5.125 x 4.25"
• Compact unit ideal for both desktop and mobile use
• Solid-state diode T/R switching — fast, silent T/R and QSK
• Large convection-cooled heat sink for reliable and quiet operation
• Modern design with rugged MOSFET output stage
• Internal wide-range automatic antenna tuner (KXAT100 ATU option)
• Second antenna jack provided with KXAT100 ATU option; controlled by KX3's ANT switch
• Fast, bright LED bar graphs for power and status; KXAT100 ATU option adds SWR bar graph
• Seamless integration with the Elecraft KX3 transceiver
• Works well with any low-power transceiver, requiring only RF and PA KEY inputs
• RF-based frequency counter automatically switches bands with any rig
• Optional band-data input support the K3/10, KX3, Yaesu FT-817, Icom IC-703, and other rigs
• Dual APP power connectors for additional friction-fit if needed (mobile); optional daisy-chaining of 13.8 V to power rig
• Optional KXPACBL adapter connects KX3 to the KXPA100 with a single cable for keying, band data, and control
• KXPA100's PC port allows use of remote-control and logging applications with the KX3 without software configuration changes
• KXAT100 internal ATU option matches 10:1 SWR (5:1 typical on 160 m and 6 m); uses Elecraft's fast matching algorithm
• KXAT100 ATU settings saved per band, per band segment, and per antenna for instant recall

KXPA100 features include:

• 100 W output on 160-6 m with 5 W input typical
• 13.8 VDC powered; 20 A typical current drain
• 7 lbs with KXAT100 installed.  10 x 5.125 x 4.25"
• Compact unit ideal for both desktop and mobile use
• Solid-state diode T/R switching — fast, silent T/R and QSK
• Large convection-cooled heat sink for reliable and quiet operation
• Modern design with rugged MOSFET output stage
• Internal wide-range automatic antenna tuner (KXAT100 ATU option)
• Second antenna jack provided with KXAT100 ATU option; controlled by KX3's ANT switch
• Fast, bright LED bar graphs for power and status; KXAT100 ATU option adds SWR bar graph
• Seamless integration with the Elecraft KX3 transceiver
• Works well with any low-power transceiver, requiring only RF and PA KEY inputs
• RF-based frequency counter automatically switches bands with any rig
• Optional band-data input support the K3/10, KX3, Yaesu FT-817, Icom IC-703, and other rigs
• Dual APP power connectors for additional friction-fit if needed (mobile); optional daisy-chaining of 13.8 V to power rig
• Optional KXPACBL adapter connects KX3 to the KXPA100 with a single cable for keying, band data, and control
• KXPA100's PC port allows use of remote-control and logging applications with the KX3 without software configuration changes
• KXAT100 internal ATU option matches 10:1 SWR (5:1 typical on 160 m and 6 m); uses Elecraft's fast matching algorithm
• KXAT100 ATU settings saved per band, per band segment, and per antenna for instant recall

KPA1500-F

The KPA1500 solid-state amplifier won’t take over your entire desktop: it’s just 4.5 x 13.5 x 11.5” (HWD; 11.5 x 34 x 29 cm). The lightweight companion power supply can be placed on the floor or in any other convenient location.

The KPA1500's no-nonsense front panel shows all important parameters at a glance, with a high-contrast 32-character LCD and fast, bright LED bar graphs. Band switching is instantaneous, via control inputs or RF sensing. Protection and monitoring circuitry is extensive and foolproof, letting you focus on the job at hand — breaking pileups and overcoming the most difficult operating conditions. And it wouldn’t be an Elecraft amp without robust PIN-diode T/R switching. Like our KPA500, the KPA1500 offers fast QSK without a noisy relay.

The amplifier’s rugged internal ATU can handle full power with load SWR up to 3:1, while a wider matching range is allowed at lower power, including up to 10:1 in standby mode.

When it’s time to make waves, you can rely on the compact, quiet, highly integrated Elecraft KPA1500.

KPA500-F (ready assembled)

160-6M, solid state linear amplifier

automatic band switching with internal frequency counter
sam size like the K3S / K3
12 kg
QSK
internal power supply adjustable 100-125V, 200-250V
 

KAT500-F (ready assembled)
mathces approx 10:1 SWR bei 500-600 W, 3:1 SWR at 1000 W.

save 80,00 EURO against single order